- Wichita (316) 262-5156
- Overland Park (913) 236-8222
- Arkansas (800) 362-3222
We offer a range of standard inventory cartridge mechanical seals, including single and double mechanical seals to suit even the most demanding application and thanks to our modular design system we offer them with the best on-time delivery performance in the industry.
Cartridge mechanical seal construction is a proven reliability improvement. The seals are pre-assembled at the factory, pressure tested and shipped as a unit, leading to improved performance as errors due to incorrect installation are reduced. Cartridge construction eliminates the need to measure and set spring compression, and having a mechanical seal pre-assembled means that the seal faces are protected from damage during installation.
Information provided by AESSEAL®
The AESSEAL® API Type A, B and C single-seal range offers the user an unprecedented range of API engineered sealing solutions to suit all application requirements.
Read More
This modular seal is ideal for the containment of hazardous process fluids.
Read More
The CFFC™ and HPVD™ are dual seals. (The CFC™ and HPVS™ are the single versions.) These robust seals are designed for use on difficult applications, including oil pipeline pumping, water injection and boiler feed duties.
Read More
The CSM™ cartridge single seal for mixers is available in a wide range of seal face, elastomer and alloy combinations, to suit individual applications.
Read More
The AESSEAL CURC™, CRCO™ and CURE™ mechanical seals are part of a range of seals specifically designed to optimize the use of Silicon Carbide.
Read More
The DMSF™ (Double Monolithic Stationary Flow) range of double mechanical seals has been designed as a high-performance sealing solution for arduous applications.
Read More
A single cartridge stationary seal with modular monolithic seal faces.
Read More
The BDFI™/BDFC™ (Bellows Double Flow Induction/Convection) is an innovative modular hybrid design, created using the inboard design of a BQFD™ and the outboard design of a DMSF™.
Read More
The BDTP™ (Bellows Double Tandem Pumping) is a highly-innovative hybrid design, modular to the BDFI™. The seal’s directed barrier fluid flow path achieves optimum heat removal at both sets of seal faces.
Read More
The BQFD™ (Bellows Quench Flush Drain) range of single cartridge mechanical seals uses many of the same modular parts as a BSIV™.
Read More
The BSAI™ range is available in a wide range of seal face and elastomer combinations, together with self-aligning, DIN, CURC™, T, L shaped or boot mounted stationaries.
Read More
The BSFG™ (Bellows Single Full Graphite) cartridge seal is specifically designed to eliminate the costly and often long lead-time issues of exotic elastomer compounds.
Read More
The BSIV™ range of single cartridge mechanical seals has been designed as a value-for-money, high-performance sealing solution for general applications.
Read More
The CDFI™ / CDFC™ bridges the product range gap between the CDSA™ and DMSF™ differentiating itself in two areas.
Read More
The CDM™cartridge double mechanical seal for mixers is available in a wide range of seal face, elastomer and alloy combinations, to suit individual applications.
Read More
The CDMSC™ is designed specifically for Mixer, Agitator and Reactor applications. Based on the modular technology of the DMSF™, this externally mounted cartridge seal incorporates many design features to help increase seal life.
Read More
The AESSEAL CDP™/CDPN™ range of cartridge mechanical seals has been designed as high-performance sealing solutions for general applications.
Read More
The CDPH™ double mechanical seal is designed to meet the arduous requirements of slurry applications. Large ports and increased radial clearances enable the seal to maintain a stable fluid film…
Read More
These robust seals are designed for use on difficult applications, including oil pipeline pumping, water injection and boiler feed duties.
Read More
The cartridge lip seal is specifically designed for dry running applications where barrier fluid is not permitted to enter the process media.
Read More
The CMAX™ is a single cartridge seal that allows for axial movement.
Read More
Cartridge seal designed to replace two-part component seals and conventional packing arrangements.
Read More
The AESSEAL CSS™/CSSN™ range of cartridge mechanical seals has been designed as high-performance sealing solutions for general applications.
Read More
The CSWIB™ (Mixmaster I) is a single cartridge mechanical seal, with balanced seal faces and an integral (steady) bearing.
Read More
The CVSD™ and CVSD-R™ mechanical seals are ideal for slurry applications. The seals are designed around AESSEAL® modular technology…
Read More
The DISP™ range double stationary mechanical seals provide highly-technical, value-engineered sealing solutions applicable for all industry sectors. The seal incorporates an integral bi-directional flow inducer for effective seal cooling.
Read More
The DSNM™ is designed to suit the Flowserve Polychem ‘S’ Series non-metalic process pump.
Read More
The DSWIB™ (Mixmaster II) is a double mixer seal with integral bearing and concentric face design to reduce the seal’s overall length.
Read More
The AESSEAL ESM (external seal for mixers) is a unit external seal designed for ease of installation as the seal faces are clipped together and dispatched assembled in a leak-free state.
Read More
The FGDSS™ (Flue Gas Desulphurization Single Slurry) single mechanical seal is designed to seal Flue Gas Desuphutization (FGD) and general slurry applications.
Read More
The FI-DSNM-R™ is designed to suit Richter (ITT-Goulds) PCK and SCK process pumps. This unique cartridge design eliminates the OEM ceramic sleeve.
Read More
The HDSS and HDDSS heavy duty slurry seals are designed for the arduous environment of the mining industry. The robust seals are built to withstand levels of pump vibration with large internal clearances accommodating levels of movement.
Read More
The IADC™ Screen seal design is a double seal available in a wide range of seal face and elastomer applications to suit individual process requirements. This seal is used on screens and knotters.
Read More
This seal employs standard, modular, inventoried AESSEAL® components, with a seal gland, which retains fluid when the screen is emptied. This avoids dry running of the tungsten carbide seal faces on equipment start-up.
Read More
The ISOS™ (inflatable shut-off seal) is fitted between the pump and and radially-divided seal, to form a separate seal when required, allowing the quick and easy removal of the mechanical seal.
Read More
The LSEAL™ is designed to suit the Flowserve Polychem ‘L’ Series, Group I and Group II non-metallic process pumps.
Read More
Mixer, agitator and reactor applications vary from simple blending to solid dissolution to the more exacting standards of suspension, gas dispersion or containing/promoting chemical reactions.
Read More
The AESSEAL Progressing Cavity Pump mechanical seal (PCPS™) has been developed to incorporate proven modular designs from our highly-acclaimed range of single and double mechanical seals.
Read More
The RDS™ eliminates the need to remove or strip equipment for seal replacement. The unique design makes it the quickest to install two part seal currently available in the market place.
Read More
The RDSF has been developed after extensive research and customer feedback to increase the ease that the seal can be fitted correctly – first time.
Read More
A short externally mounted cartridge seal, with flush ports and self-aligning faces.
Read More
The SEA2™ and SEH1™ range of cartridge single mechanical seals is specifically designed for the chemical industry. This Exotic Alloy range, offered in standard and ANSI+ configurations, is available in solid Alloy 20 and Alloy 276 materials.
Read More
Modular range of stationary cartridge mechanical seals for general applications in all industry sectors.
Read More
A single cartridge stationary seal with integral Plan 23. Coupled with a helicoil cooler, the seal provides the most efficient sealing solution for this piping arrangement.
Read More
The TPOC™ seal range is specifically designed for applications which benefit from the use of unbalanced seal face technology.
Read More
The UHDDS™ – is a double cartridge seal particularly applicable for medium to heavy duty slurry sealing applications.
Read More
"*" indicates required fields
